Diesel / Premium Diesel
LEGAL DIESEL® Fuel Additive AFS WDA-2010
Performance Specialties – Winter
AFS WDA-2010 is a multifunctional winter middle distillate fuel additive. It offers a combination of wax modifiers and wax anti-settling agents to improve low temperature operability. It provides L10 injector detergency, fuel stabilization, and corrosion inhibition, while maintaining fuel economy and emission control. AFS WDA-2010 was designed especially for low sulfur and ultra-low sulfur diesel applications.
AFS WDA-2010 provides the following performance benefits:
- Lowers Cold Filter Plugging Point
- Lowers Pour Point
- Prevents fuel gelling in low temperatures
- Disperses wax during extended engine shutdowns in cold climates
- L10 superior detergency keeps injectors clean and maintains engine performance
- Removes and prevents deposits which can deteriorate fuel economy and emissions
- Non-acid synthetic lubricity improver
- Corrosion inhibitor
- Demulsifier helps prevent fuel/water emulsions
- Aids against fuel filter icing
- Safely removes water on a gradual basis using formulated dispersants
Addition
AFS WDA-2010 may be continuously or batch blended into diesel fuel as a concentrate or as a stock solution. Proper blending and handling procedures must be followed due to the nature of all low temperature operability additives. Blend the additive with the fuel at temperatures at least 10ºF above the cloud point of the fuel. Ensure the additive is at or above minimum handling temperatures to avoid potential performance issues. Verify that the additive is completely dissolved into the fuel.
Material Compatibility
AFS WDA-2010 is compatible with the following materials of construction: mild steel, 304 stainless steel, 316 stainless steel, Teflon, and Viton. Do not use with Hypalon, polyethylene, polypropylene, neoprene, Buna-N, or natural rubber. Copper, brass, or bronze (yellow metals) should not be used with neat additive.
Personal Safety, First Aid and Storage and Handling
See the Material Safety Data Sheet for product specific information.
View Material Safety Data Sheet
| Typical Properties | |
| Appearance | clear yellow liquid |
| Specific Gravity, 60/60°F (15.6/15.6°C) | 0.889 |
| Density, lb./gal, 60°F, (15.6°C) | 7.40 |
| Flash Point, PMCC, °F (C°) | 120 (48.9) |
| Pour Point, °F (°C) | <-40 (<-40) |
| Viscosity, cSt @ 100°F (37.8°C) | 3 |
| Viscosity, cSt @ 68°F (20°C) | 4 |
| Viscosity, cSt @ 32°F (0°C) | 5 |
| Viscosity, cSt @ 0°F (-17.8°C) | 11 |
| Viscosity, cSt @ -20°F (-28.9°C) | 16 |
| Treat Rate to Deliver L10 Detergency | 1 gallon : 1000 gallons, 885 mg/L |
| Registered EPA Maximum Treat Rate = 2500 mg/L |
40CFR80.591 Compliance Statement: The sulfur content of this diesel fuel additive does not exceed 15 ppm. This is a LEGAL DIESEL® Fuel Additive product.
In order to comply with EU regulations (Title II, Chapter 1, Article 8) and to secure documentation to allow this product to be imported into the EU please contact Innospec to join our “Only Representative” and Declaration of Conformity Program.
Seasonal Premium Diesel Formula AFS-SDA-5000
Spring, Summer, Fall
Application
AFS SDA 5000 is a highly concentrated diesel fuel additive that cleans fuel injectors reduces emissions and improves fuel economy while contributing to less maintenance and longer equipment life. AFS SDA 5000 treats one gallon for each 5000 gallons of diesel fuel and will exceed Cummins L-10 Superior Performance criteria at this range.
Performance Features:
- Exceeds Cummins L-10 Superior Performance
- Exceeds Cummins N-14
- Keeps Injectors Clean
- Improves Fuel Economy
- Improves Fuel Lubricity
- Improves Fuel Stability
- Imparts Corrosion Protection
Personal Safety, First Aid and Storage and Handling
See the Material Safety Data Sheet for product specific information.
View Material Safety Data Sheet
| Typical Characteristics | |
| Specific Gravity @ 40C | 0.894 |
| Lbs/gallon | 7.44 |
| Flash Point (PMCC F) | 110.0 |
| Viscosity, cST@40C | 3.64 |
| Pour Point, F | -40 |
| Treat Ratios | 1:5000 |